HIT HBM004 Manuale Utente
Sony Ericsson T68
Scroll to Menu, Connect – Bluetooth – Discover
When the screen shows HBM-004 press YES
Add to paired,press YES
A headset is already paired with the phone. Replaced? Press YES
Passkey:Press 0000,and then press YES
Pairing succeeded,Name tag Press NO
Add device,Press NO
Operation mode can be set to On or Automatic
However, if you wish to use the voice control function, you will need to set the Operation
mode to On.
Attention:
If pairing process fails, please go through the process again. Finish the pairing process
within 2 minutes if possible.
Turn the headset on
Press and hold Power Key over 5 seconds, you can hear beeper tones from earpiece receiver also
the headset status indicator light flashes green. If the battery is low, the light flashes red.
Turn the headset off
Press and hold Power Key over 5 seconds, you can hear beeper tones from earpiece receiver also
the headset status indicator light is switched off.
Answering
When the headset is on, the green light will be flashing once in 4 seconds, meaning that the
headset is on standby mode. When call comes in, please press the talking button to answer the
call. To hang up, press the same button or operate from the phone.
※Outgoing call
Nokia 8910
Let headset establish connection with mobile phone at first: press headset talking button one
time, you will hear beeper tone from headset & mobile phone screen will show ”Connected to
HBM-004”
Then directly dial numbers from mobile phone, the call will transfer automatically from the
phone to headset.
Attention:
Please complete to dial numbers within 15 seconds after establishing connection between headset