Geophysical Survey Systems Inc. D50300800 Manuale Utente
Quick Start Guide
UtilityScan DF
Copyright © 2012 Geophysical Survey Systems, Inc.
20
All Rights Reserved
New Project Mode and Last Project Mode
•
New Project Mode will allow you to configure the system as desired for a new project or continue with an old
project.
project.
•
Last Project Mode will bypass the Folder selection screen and continue with the last project with all its settings
from the last project. In this mode, you still can make changes to the settings.
from the last project. In this mode, you still can make changes to the settings.
•
In either mode, the options are the same.
After selecting New Project, select which folder you would like to save your data, or
create a new folder for a new project.
You may do one of the following:
a)
Tap on the arrows and select a folder (project. All files save will be saved to
this folder and the name of the files will be folder name + a sequential
number. Tap on Accept to the continue.
this folder and the name of the files will be folder name + a sequential
number. Tap on Accept to the continue.
b)
Tap on New Data Path to create a new folder (project).
• Enter and save the new folder (project) name.
• Highlight the new folder (project) by tapping on the arrows.
• Tap on Accept to continue.
• Highlight the new folder (project) by tapping on the arrows.
• Tap on Accept to continue.
c)
Tap on Cancel. The files will be saved to the last folder that was used.