Intermarketing Ltd. 60204007 Manuale Utente

 15

Landauer

Aurion

TM

 Reference Guide

Placing the dosimeter with the smart card inserted face down on the display unit in the read out
area starts the read out process. The following information appears on the display unit screen:

Seconds later:

The display unit displays the monitoring dose (since the last read out) and integrated dose
(since last activation of this dosimeter) on separate screen sequentially. You can change which
dose displays first at Landauer’s web site on Aurion’s Display Units – Configuration page
(Chapter 4, p. 10). Aurion reports exposure results in increments of 5 mrem or .05 mSv.

When the participant is finished using the dosimeter for an assignment, the participant removes
their smart card from the dosimeter and places the empty dosimeter face down on the display
unit in the read out area. The following information appears on the display unit screen:

Press [F1] key and following message is displayed:

Note:  An assignment may be defined as a task accomplished by a visitor, a larger unit of time
for a temporary assignment, or as long as six months for a permanent assignment.

If a smart card was removed from the dosimeter without performing a deactivation, and a new
smart card is inserted into the dosimeter, the display unit automatically deactivates the
dosimeter for the previous participant and immediately activates the dosimeter for the new
participant with their smart card. The following information appears on the display unit screen:

Seconds later:

Are you sure you want to

deactivate this dosimeter?

F1 = Y
F2 = N

Screen 7.8

CHRIS A. EDWARDS

Wear Loc: WBD
DEACTIVATED

Screen 7.9

PAT THOMPSON

Wear Loc: WBD

ACTIVATED

Screen 7.11

Screen 7.10

CHRIS A. EDWARDS

Wear Loc: WBD
DEACTIVATED

CHRIS A. EDWARDS

Monitoring Dose - WBD

Deep        XX mrem

Shallow    XX mrem

CHRIS A. EDWARDS

Integrated Dose-WBD

Deep          XX mrem

Shallow     XX mrem

Screen 7.6

Screen 7.7