Vocera Communications B3000N Manuale Utente
BADGE FEATURES
30
VOCERA BADGE USER GUIDE
Turning Privacy Mode On or Off
Version: Vocera 4.3 SP2 or later
You can turn privacy mode on or off for B3000n and B3000 badges. After you answer a call in
speakerphone mode, you can put the caller on hold, switch to privacy mode, and then resume
the call.
speakerphone mode, you can put the caller on hold, switch to privacy mode, and then resume
the call.
To turn privacy mode on or off:
1. Hold the badge, and orient it so that you can read the screen.
2. Press the Select button to see the menu, then press the Up button until you see the
1. Hold the badge, and orient it so that you can read the screen.
2. Press the Select button to see the menu, then press the Up button until you see the
Settings
icon.
3. Press the Select button to choose the Settings menu.
4. Press the Up button until you see the
4. Press the Up button until you see the
Privacy
icon.
5. Press the Select button to choose the Privacy menu.
6. Press the Up or Down buttons to switch between
6. Press the Up or Down buttons to switch between
Privacy Mode Off
or
Privacy Mode On
, and
then press the Select button to make your selection and return to the main screen.
When privacy mode is on, the privacy mode icon appears at the bottom of the screen.
When privacy mode is on, the privacy mode icon appears at the bottom of the screen.
To use privacy mode:
Press the Call button to make a call or answer a call, and then put the badge speaker to your
ear and speak into the primary microphone located on the front of the badge at the top right
corner.
ear and speak into the primary microphone located on the front of the badge at the top right
corner.
To switch to privacy mode while on a call:
1. Press the DND button on the top of the badge to put the call on hold.
2. Hold the badge, and orient it so that you can read the screen.
3. Press the Select button to see the menu, then press the Up button until you see the
1. Press the DND button on the top of the badge to put the call on hold.
2. Hold the badge, and orient it so that you can read the screen.
3. Press the Select button to see the menu, then press the Up button until you see the
Settings
icon.
4. Press the Select button to choose the Settings menu.
5. Press the Up button until you see the
5. Press the Up button until you see the
Privacy
icon.
6. Press the Select button to choose the Privacy menu.
7. Press the Up or Down buttons to switch to
7. Press the Up or Down buttons to switch to
Privacy Mode On
, and then press the Select
button to make your selection and return to the main screen.
8. Put the badge speaker to your ear, and press the DND button to resume the call on hold.
Specifying the Group Mode Setting
Version: Vocera 4.3 GA or later
The Group Mode setting, which is available on B3000n and B3000 badges, lets you disable
the noise canceling microphones while you are on a call. By disabling the noise canceling
microphones, the speech zone is effectively widened, thus letting people other than you speak
into the badge's primary microphone.
the noise canceling microphones while you are on a call. By disabling the noise canceling
microphones, the speech zone is effectively widened, thus letting people other than you speak
into the badge's primary microphone.
The Group Mode setting affects the badge's speech zone only when you are on a badge-to-
badge call. Group Mode is always off during Genie interactions and broadcasts.
badge call. Group Mode is always off during Genie interactions and broadcasts.
To specify the Group Mode setting:
1. Hold the badge, and orient it so that you can read the screen.
2. Press the Select button to see the menu, then press the Up button until you see the
1. Hold the badge, and orient it so that you can read the screen.
2. Press the Select button to see the menu, then press the Up button until you see the
Settings
icon.
3. Press the Select button to choose the Settings menu.
4. Press the Up button until you see the
4. Press the Up button until you see the
Group Mode
icon.