Kondo Kagaku Co. Ltd. T090515 Manuale Utente

※Alarm sounds when batteries are depleted. Install fresh 

batteries as soon as possible to keep radio power.

Model name (MENU26) 

Voltage

Antenna

LCD display (factory setting)

Steering wheel

Throttle trigger

Power switch

Foward key

Back key

+/ Enter key
−/ Cancel key

ET1 lever

(Steering trim)

ET2 lever

(Throttle trim)

ET3 lever

(Steering travel)

ET4 lever

(3ch control)

LED indicator

Set button

Battery connector

Channel 1∼4 connector

●Transmitter
 （EX-5UR）

●Receiver（KR-407S）

※EX-5UR requires “pairing” to register the transmitter ID number to the receiver the first time you use.

 When operating several receivers (cars) using one transmitter, perform "pairing" for each receivers only first time you use.

Battery box (inside)

※Note polarity and install fresh batteries. Depleted batteries  

 may deteriorate radio power and cause problems.

※Read instructions included with servo and speed controller before connection and usage.

※Regarding servo and ESC, please refer 

 each set-supplied instruction manual.

Battery box

R6/AA/UM3 battery

Transmitter (bottom)

Battery cover

Adjust steering and throttle/brake settings  ←Refer to P.5

Adjust failsafe  ←Refer to P.15

Register the transmitter to the receiver to complete “pairing”←Refer to P.5

Install batteries (R6/AA/UM3 size batteries x 

8) to transmitter, then install running battery 

to electric R/C car. For gas R/C car, install 

receiver batteries.

Install receiver, servo, ESC (when using with electric car) and connect cables. Install 

receiver noting anti-noise measures.  ←Refer to P.4

LCD indicates voltage after a certain period of time.

■ Name of parts／Unit preparation