CommScope Technologies LLC S1000R Manuale Utente
Troubleshooting
24
Resetting the S1000R
The S1000R has a RESET button on the bottom of the unit, as shown in the following diagram.
If your S1000R operates properly for an extended period and the WAN LED suddenly starts blinking red,
the S1000R may have a problem requiring a reset. To reset, push the RESET button for at least 10
seconds.
the S1000R may have a problem requiring a reset. To reset, push the RESET button for at least 10
seconds.
for the setup sequence.
If the failure persists after resetting the S1000R, contact Customer Care. Refer to