CommScope Technologies LLC HUBBUBC4502-RT Manuale Utente
20
Resetting the AIRAVE
If your AIRAVE was operating properly for an extended period and the Mobile LED suddenly
starts blinking red, the AIRAVE may have a problem requiring a reset. To reset the AIRAVE,
push the Reset button for at least 10 seconds (as shown in the drawing below).
starts blinking red, the AIRAVE may have a problem requiring a reset. To reset the AIRAVE,
push the Reset button for at least 10 seconds (as shown in the drawing below).
After resetting, your AIRAVE goes through an automated setup sequence. During this time, the
device’s green LEDs will be solid for a few seconds, and then all LEDs will turn off until the
software loads. The reset process may take 30-45 minutes.
device’s green LEDs will be solid for a few seconds, and then all LEDs will turn off until the
software loads. The reset process may take 30-45 minutes.
After resetting the AIRAVE, if the failure persists, contact Customer Care. See Getting Help on
page 26.
page 26.