Billion Electric Co. Ltd. BIL-MX210NP Manuale Utente
Device Configuration
Interface Setup – Wireless
52
BEC MX-210NP User Manual
Wireless
This section introduces the wireless LAN and some basic configurations.
NOTE: WLAN1 / 2 / 3 / 4 Interface refers to as SSID1 / 2 / 3 / 4 Wi-Fi networks.
Access Point Settings
Site Servey: Click to view all other available Wireless-AP devices around the MX-210NP.
CH (Channel): Channel ID used.
SSID: The name of the wireless AP.
BSSID: The MaC address of the wireless AP.
Security: The security mode in the wireless AP.
Singal (%): Singal strength of the wireless AP. Signal incrases means the wireless AP is closer
to your MX-210NP and may cause interferences.
to your MX-210NP and may cause interferences.
Access Point: Default setting is set to Activated. If you want to close the wireless interface, select
Deactivated.
Deactivated.
AP MAC Address: The MAC address of wireless AP.
Wireless Mode: The default setting is 802.11b+g+n (Mixed mode). If you do not know or have both
11g and 11b devices in your network, then keep the default in mixed mode. From the drop-down
manual, you can select 802.11g if you have only 11g card. If you have only 11b card, then select
802.11b and if you only have 802.11n then select 802.11n.
11g and 11b devices in your network, then keep the default in mixed mode. From the drop-down
manual, you can select 802.11g if you have only 11g card. If you have only 11b card, then select
802.11b and if you only have 802.11n then select 802.11n.
Channel: The range of radio frequencies used by IEEE 802.11b/g/n wireless devices is called a
channel. There are Regulation Domains and Channel ID in this field. The Channel ID will be different
based on Regulation Domains. Select a channel from the drop-down list box.
channel. There are Regulation Domains and Channel ID in this field. The Channel ID will be different
based on Regulation Domains. Select a channel from the drop-down list box.