Tranzeo Wireless Technologies Inc GNVPZ1NT3 Manuale Utente
Chapter 18: Integration with Enterprise Equipment
TR0153 Rev. E1
139
Figure 62. Adding trusted MAC addresses and accessible hosts
18.1.6
Bypass Splash Pages for Access to Specific Hosts
It is possible to specify a list of IP addresses that client devices can access without the client
devices having to view a splash screen.
devices having to view a splash screen.
CLI
The list of hosts that can be accessed without having to view a splash screen is set with the
‘splash.bypass_hosts’ parameter in the ‘sys’ interface. The hosts are specified by their IP
addresses and must be separated by commas. An example of setting this parameter is shown
below.
‘splash.bypass_hosts’ parameter in the ‘sys’ interface. The hosts are specified by their IP
addresses and must be separated by commas. An example of setting this parameter is shown
below.
> use sys
sys> set splash.bypass_hosts="1.1.1.1,2.2.2.2"
sys> set splash.bypass_hosts="1.1.1.1,2.2.2.2"
Web GUI
The IP addresses of hosts that can be accessed without having to view a splash screen can be
set on the “Advanced Splash Pages” sub-tab under the “AAA” tab on the “System Parameters”
page of the web interface (see Figure 62). The list of IP addresses of bypassed hosts is
set on the “Advanced Splash Pages” sub-tab under the “AAA” tab on the “System Parameters”
page of the web interface (see Figure 62). The list of IP addresses of bypassed hosts is