Tranzeo Wireless Technologies Inc GNVPZ1NT3 Manuale Utente
Chapter 19: Diagnostics Tools
TR0153 Rev. E1
147
19.4 Centralized DHCP Testing
The “DHCP” tab on the “Diagnostics” page can be used to test access to an external DHCP
server when the EnRoute500 is in centralized DHCP server mode (see Figure 67). Click on the
“Test DHCP” button to initiate a test. The results of the test will be displayed at the bottom of
the page.
server when the EnRoute500 is in centralized DHCP server mode (see Figure 67). Click on the
“Test DHCP” button to initiate a test. The results of the test will be displayed at the bottom of
the page.
Figure 67. Testing the connection to an external DHCP server
19.5 RADIUS Server Testing
The “RADIUS” tab on the “Diagnostics” page can be used to test authentication of credentials
by a RADIUS servers used for splash page or WPA authentication (see Figure 68). Use the
procedure below to test the validity of credentials with a RADIUS server.
by a RADIUS servers used for splash page or WPA authentication (see Figure 68). Use the
procedure below to test the validity of credentials with a RADIUS server.
1. Select the RADIUS server you want to use for the test from the drop-down menu
2. Enter the credentials you want to test in the “Username” and “Password” fields
3. Click on the “Test User” button
2. Enter the credentials you want to test in the “Username” and “Password” fields
3. Click on the “Test User” button
The results of the test will be displayed at the bottom of the page. Three outcomes are
possible:
• The credentials were authenticated by the server
• Communication was established with the server, but the credentials were not valid
• It was not possible to establish communication with the server
• Communication was established with the server, but the credentials were not valid
• It was not possible to establish communication with the server