BIOTRONIK SE & Co. KG ICSPGH Manuale Utente
22
Ports on the Operation Module
Ports on the Operation Module
Note:
The ECG and PGH ports are mechanically coded; it is
not possible to connect the cables incorrectly.
not possible to connect the cables incorrectly.
ECG port
The ECG module is used with extremity leads:
3-channel ECG (Einthoven) and a miniclinic to monitor
the functioning of implants.
3-channel ECG (Einthoven) and a miniclinic to monitor
the functioning of implants.
•
14-pin port for PK-222 or PK-199
Caution!
The plugs of the patient cables may not touch any
conductive or grounded components!
conductive or grounded components!
Note:
For information regarding approved adhesive and clip
electrodes for surface leads, see page 40
electrodes for surface leads, see page 40
PGH
The 14-pin port for the programming head (see fold-
out page) is located at the back of the Operation
Module.
out page) is located at the back of the Operation
Module.
Infrared
Normal IrDA standard (infrared interface, see fold-out
page) with transfer rates of up to 115 kbps.
page) with transfer rates of up to 115 kbps.
Bluetooth interface
Bluetooth is an industry standard for wireless
networking of devices over a short distance. It can be
used to connect an external printer; see page 26.
networking of devices over a short distance. It can be
used to connect an external printer; see page 26.