D-Link Corporation SL2640BB3 Manuale Utente

Pagina di 86
Section 2 - Installation 
D-Link DSL-2640B User Manual 
 
   
 
 
 
 
 
 
 
 
 
            
9
Installation Notes 
In order to establish a connection to the Internet it will be necessary to provide information to the Router that will be stored in its memory. For some 
users, only their account information (Username and Password) is required. For others, various parameters that control and define the Internet 
connection will be required. You can print out the two pages below and use the tables to list this information. This way you have a hard copy of all 
the information needed to setup the Router. If it is necessary to reconfigure the device, all the necessary information can be easily accessed. Be 
sure to keep this information safe and private. 
Low Pass Filters 
Since ADSL and telephone services share the same copper wiring to carry their respective signals, a filtering mechanism may be necessary to 
avoid mutual interference. A low pass filter device can be installed for each telephone that shares the line with the ADSL line. These filters are easy 
to install passive devices that connect to the ADSL device and/or telephone using standard telephone cable. Ask your service provider for more 
information about the use of low pass filters with your installation.   
Operating Systems 
The DSL-2640B uses an HTML-based web interface for setup and management. The web configuration manager may be accessed using any
operating system capable of running web browser software, including Windows 98 SE, Windows ME, Windows 2000, and Windows XP.   
Web Browser 
Any common web browser can be used to configure the Router using the web configuration management software. The program is designed to 
work best with more recently released browsers such as Opera, Microsoft Internet Explorer® version 6.0, Netscape Navigator® version 6.2.3, or 
later versions. The web browser must have JavaScript enabled. JavaScript is enabled by default on many browsers. Make sure JavaScript has not 
been disabled by other software (such as virus protection or web user security packages) that may be running on your computer. 
Ethernet Port (NIC Adapter) 
Any computer that uses the Router must be able to connect to it through the Ethernet port on the Router. This connection is an Ethernet connection 
and therefore requires that your computer be equipped with an Ethernet port as well. Most notebook computers are now sold with an Ethernet port 
already installed. Likewise, most fully assembled desktop computers come with an Ethernet NIC adapter as standard equipment. If your computer 
does not have an Ethernet port, you must install an Ethernet NIC adapter before you can use the Router. If you must install an adapter, follow the 
installation instructions that come with the Ethernet NIC adapter.