Honeywell International Inc. 480628-4096 Manuale Utente
Installation for Windows
Setting the WaveLAN Parameters
Setting the WaveLAN Parameters
3-16
WaveLAN/IEEE Turbo 11 Mb PC Card
Connecting to a Specific Network
3
If you would like to connect to one specific WaveLAN Network only,
enter the “WaveLAN Network Name” that applies to your network,
for example: “
enter the “WaveLAN Network Name” that applies to your network,
for example: “
MY_WAVELAN_NETWORK
”.
This is the WaveLAN Network Name that the LAN Administrator
programmed into the WavePOINT-II access points. Consult your
LAN Administrator for the value that applies to your network.
programmed into the WavePOINT-II access points. Consult your
LAN Administrator for the value that applies to your network.
Setting up a New IEEE 802.11 Infrastructure?
3
When setting up a new IEEE 802.11 network, you may enter a
“WaveLAN Network Name” of your choice. This name should also
be programmed into other WaveLAN stations, and (if applicable)
the WavePOINT-II access points.
“WaveLAN Network Name” of your choice. This name should also
be programmed into other WaveLAN stations, and (if applicable)
the WavePOINT-II access points.
The WaveLAN Network Name can be any alphanumeric string in
the range of “a” to “z”, “A” to “Z” and “0” to “9”. This string which
can contain from 1 to 32 characters is case-sensitive.
the range of “a” to “z”, “A” to “Z” and “0” to “9”. This string which
can contain from 1 to 32 characters is case-sensitive.
Example: “
MY_WAVELAN_NETWORK
”
Station Name
3
The Station Name is a name that will be used to identify your
WaveLAN station in the WaveLAN diagnostic tools described in
Chapter 4.
WaveLAN station in the WaveLAN diagnostic tools described in
Chapter 4.
■
When your computer runs the Windows 95 or Windows 98
operating system, enter a string of alphanumeric characters in
the range of “a-z”, “A-Z” and “0-9” with a maximum of 32
characters.
operating system, enter a string of alphanumeric characters in
the range of “a-z”, “A-Z” and “0-9” with a maximum of 32
characters.
You are advised to use the same name as the one you entered
in the “Computer Name” field in your Windows Network
Neighborhood Properties (see Figure 3-4 on page 3-12).
in the “Computer Name” field in your Windows Network
Neighborhood Properties (see Figure 3-4 on page 3-12).