Secure Care Products Inc INDOORNODE2 Manuale Utente
Doc. No.: A03490690 Rev.: 1 ECO: 12274 Date 11/10/2016 33
SECTION 10 ADDING DEVICES
Secure Care Software
All programming for the Node is performed through the Secure Care ENVisionIT software. Refer to the
ENVisionIT Technical User manual for programming and user information.
ENVisionIT Technical User manual for programming and user information.
ENVisionIT RTLS Management Software
All tags and nodes can be tracked and managed using the Secure Care ENVisionIT software.
mVision Event Notification Software
The ENVisionIT system can interface with the Secure Care mVision alerting software. Events will then be sent to
the assigned staff.
the assigned staff.
Loading the RTLS System with Device Information
Adding a node to the RTLS network
Follow these steps to add a device into the ENVisionIT system. Devices include MatchMaker, EXIU, EHUB,
nodes, tags, network routers, etc.
Devices can only be added after the ENVisionIT system has been installed and configured.
Refer to the ENVisionIT system user manual for more specific information and steps.
From the Secure Care dashboard
nodes, tags, network routers, etc.
Devices can only be added after the ENVisionIT system has been installed and configured.
Refer to the ENVisionIT system user manual for more specific information and steps.
From the Secure Care dashboard
1. Choose the “Menu” tab
2. Choose the Device Setup tab
3. Enter the device information in the fields provided
4. Save device info (Button at bottom right of screen)
2. Choose the Device Setup tab
3. Enter the device information in the fields provided
4. Save device info (Button at bottom right of screen)
Figure 14 - Add Device Screen
The Device Configuration screen will change depending on the device being added.