FreeWave Technologies Inc. AMI0032AT Manuale Utente
Spread Spectrum Wireless Data Transceiver User Manual
Preliminary GXM Manual
Version 0.2
41
PRELIMINARY
Note:
With firmware x.40 and above, the Subnet ID default is F,F. A Multipoint Master with an F,F
Subnet ID will behave the same as if the Subnet ID was set to 0,0. A Multipoint Slave with a
Subnet ID of F,F will not roam from one repeater or network to the next, it will only link to a
Master or Repeater that has either a Transmit Subnet of 0 or an F,F Subnet ID.
Subnet ID of F,F will not roam from one repeater or network to the next, it will only link to a
Master or Repeater that has either a Transmit Subnet of 0 or an F,F Subnet ID.
(D)
R
ADIO
ID
Option (D) allows a transceiver to be designated with an arbitrary, user selectable, 4-digit number which
identifies the transceiver in diagnostics mode.
identifies the transceiver in diagnostics mode.
(E)
L
OCAL
M
ODE
Option (E) allows the user to access an FGR2 or IM series Multi-point slave with a local master. This
Master is not the network master. This feature is only available with firmware versions 2.64 (FGR) and
3.64 (IM) or newer firmware. Please see Application note #5457 Local Mode for more information.
Master is not the network master. This feature is only available with firmware versions 2.64 (FGR) and
3.64 (IM) or newer firmware. Please see Application note #5457 Local Mode for more information.
(G)
R
ADIO
N
AME
Option (G) allows the user to set a unique 20 character Radio name.