FreeWave Technologies Inc. ARN2110AT Manuale Utente
FreeWave Technologies
October 22, 2013
October 22, 2013
900 MHz Spread Spectrum Installation Manual
V5.3
LIG0003AC Rev D
1 of 11
FreeWave Technologies, Inc.
900 MHz Wireless Modem
Installation Guide
This installation guide covers all models of the FreeWave Technologies 900 MHz spread
spectrum transceiver sold under FCC ID KNY-6231812519 and KNYARN2110AT.
All transceiver models sold under FCC ID KNY-6231812519 and KNYARN2110AT
must be installed professionally. These transceivers are only approved for use
when installed in devices produced by FreeWave Technologies or third party
OEMs approved by FreeWave Technologies. The antenna(s) to be used must be
installed to provide a separation distance of at least 23 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or
transmitter. This transceiver must be installed in a NEMA enclosure.
must be installed professionally. These transceivers are only approved for use
when installed in devices produced by FreeWave Technologies or third party
OEMs approved by FreeWave Technologies. The antenna(s) to be used must be
installed to provide a separation distance of at least 23 cm from all persons and
must not be co-located or operating in conjunction with any other antenna or
transmitter. This transceiver must be installed in a NEMA enclosure.