FreeWave Technologies Inc. PMT0101AA Manuale Utente
ZumLink Z9-C or Z9-T: User Manual
Figure 7:
ZumLink
radioSettings
14. Set the
radioSettings.txPower
between 10 and 30.
Example:
txPower=30
or
radioSettings.txPower=30
.
15. Select one radio and set the
radioSettings.radioMode=Gateway
.
16. Set the other radios in the network with a
radioSettings.radioMode=Endpoint
.
17. Set the
radioSettings.networkId
to be the same on all radios in the network.
18. On each Endpoint, set the
radioSettings.nodeId
to a unique number (between 2 and
65533) in the network.
Important!
: The Gateway
radioSettings.nodeId
defaults to 1 and CANNOT be changed.
19. Type
Save
(for the settings to remain after a power cycle) and press <Enter>.
20. Type
exit
and press <Enter> to exit the FreeWave Shell.
Type
help
to view additional information about the
ZumLink
settings.
LUM0075AA Rev May-2016
Page 13 of 40
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.