AeroComm Corporation 44249AJ Manuale Utente
5
5
5
5////8/2007
8/2007
8/2007
8/2007
31
31
31
31
5.1.8
5.1.8
5.1.8
5.1.8 UP_RESE
UP_RESE
UP_RESE
UP_RESET (pin 15)
T (pin 15)
T (pin 15)
T (pin 15)
UP_RESET provides a direct connection to the reset pin on the AC4424 microprocessor. To
guarantee a valid power-up reset, this pin should never be tied Low on power-up. For a valid
power-on reset, reset must be High for a minimum of 50us.
guarantee a valid power-up reset, this pin should never be tied Low on power-up. For a valid
power-on reset, reset must be High for a minimum of 50us.
5.1.9
5.1.9
5.1.9
5.1.9 Comm
Comm
Comm
Command/Data (pin 17)
and/Data (pin 17)
and/Data (pin 17)
and/Data (pin 17)
When logic High, transceiver interprets Host data as transmit data to be sent to other
transceivers and their Hosts. When logic Low, transceiver interprets Host data as command
data (see Section 4, Configuring the AC4424)
transceivers and their Hosts. When logic Low, transceiver interprets Host data as command
data (see Section 4, Configuring the AC4424)
(see Section 4, Configuring the AC4424)
(see Section 4, Configuring the AC4424)
(see Section 4, Configuring the AC4424).
5.1.10
5.1.10
5.1.10
5.1.10 In Range (pin 2
In Range (pin 2
In Range (pin 2
In Range (pin 20)
0)
0)
0)
The IN_RANGE pin at the connector will be driven logic Low when a Client is in range of a
Server on the same RF Channel
Server on the same RF Channel
RF Channel
RF Channel
RF Channel and System ID
System ID
System ID
System ID. If a Client cannot hear a Server for 5s, it will
drive the IN_RANGE pin logic High and enter a search mode looking for a Server. As soon as
it detects a Server, the IN_RANGE pin will be driven logic Low. A Server Host can determine
which Clients are in range by the Server’s Host software polling a Client’s Host.
it detects a Server, the IN_RANGE pin will be driven logic Low. A Server Host can determine
which Clients are in range by the Server’s Host software polling a Client’s Host.