AeroComm Corporation 44249AJ Manuale Utente
5
5
5
5////8/2007
8/2007
8/2007
8/2007
6
6
6
6
AC4424 Features
AC4424 Features
AC4424 Features
AC4424 Features
Simple 5V TTL level serial interface for fast integration
Frequency Hopping Spread Spectrum for security and interference rejection
Cost Efficient for high volume applications
Low power consumption for battery powered implementations
Small size for portable and enclosed applications
Very Low latency and high throughput
Industrial temperature (-40°C to 80°C)
1.
1.
1.
1. Overview
Overview
Overview
Overview
The AC4424 is a member of AeroComm’s ConnexRF OEM transceiver family. It is designed
for integration into OEM systems operating under FCC part 15.247 regulations for the 2.4
GHz ISM band.
for integration into OEM systems operating under FCC part 15.247 regulations for the 2.4
GHz ISM band.
The AC4424 is a cost-effective, high performance, 2.4 GHz frequency hopping spread
spectrum transceiver. It provides an asynchronous TTL level serial interface for OEM Host
communications. Communications include both system and configuration data. The Host
supplies system data for transmission to other Host(s). Configuration data is stored in an on-
board EEPROM. All frequency hopping, synchronization, and RF system data
transmission/reception is performed by the transceiver.
spectrum transceiver. It provides an asynchronous TTL level serial interface for OEM Host
communications. Communications include both system and configuration data. The Host
supplies system data for transmission to other Host(s). Configuration data is stored in an on-
board EEPROM. All frequency hopping, synchronization, and RF system data
transmission/reception is performed by the transceiver.
The AC4424 transceivers can be used as a direct serial cable replacement – requiring no
special Host software for operation. They also feature a number of On-the-Fly Control
Commands providing the OEM Host with a very versatile interface for any situation.
special Host software for operation. They also feature a number of On-the-Fly Control
Commands providing the OEM Host with a very versatile interface for any situation.
AC4424 transceivers operate in a Point-to-Point or Point-to-Multipoint, Client-Server or Peer-
to-Peer architecture. One transceiver is configured as a Server and there can be one or many
Clients. To establish synchronization between transceivers, the Server emits a beacon. Upon
detecting a beacon, a Client transceiver informs its Host and a RF link is established.
to-Peer architecture. One transceiver is configured as a Server and there can be one or many
Clients. To establish synchronization between transceivers, the Server emits a beacon. Upon
detecting a beacon, a Client transceiver informs its Host and a RF link is established.
There are two data rates the OEM should be aware of:
• Serial Interface Data Rate – All transceivers can be configured to common PC
serial port baud rates from 110 bps to 288,000 bps.
• Effective Data Transmission Rate – The AC4424 is a highly efficient, low-latency
transceiver. The RF baud rate of the AC4424 is fixed at 576kbps and is
independent of the serial interface data rate.
independent of the serial interface data rate.
This document contains information about the hardware and software interface between an
AeroComm AC4424 transceiver and an OEM Host. Information includes the theory of
operation, specifications, interface definition, configuration information and mechanical
drawing.
AeroComm AC4424 transceiver and an OEM Host. Information includes the theory of
operation, specifications, interface definition, configuration information and mechanical
drawing.