Chuan Shih Industrial Co Ltd 09 Manuale Utente

CHUAN SHIH INDUSTRIAL CORPORATION LTD.       Energy Saving Lamp               FCC ID: KQP09 

 
 
 
 
1.0.  General Description 
 
These 3-Way CFL products are a direct replacement to the 3-Way Incandescent Bulbs.   
They are self-ballasted, screw-in Compact Fluorescent Lamps, to be used in the 3-Way 
sockets, driven by a 3-Way switch, primarily on the Table Lamp and Floor Lamp 
applications. 
The applications, by the nature of the 3-way switch operation, require an easy access by 
hand, in order to perform the sequential switching of the 3 Light Levels.  
 
1.1.  The 3 Light Levels  
 
Similar to any typical Incandescent Bulb operation, these CFL Products are capable of 
generating 3 distinct Light Levels. 
Turning the 3-Way Switch from the OFF state will generate the first Light Level, 
followed by the two more Light Levels, in a sequential increase of Light Intensity. 
The first Light Level generates a level of Light Intensity in the range of about (20-30)%, 
the next Light Level generates a level of Light Intensity in the range of (50-60)%, while 
the highest Light Level generates a level of 100% of Light Intensity.      
 
2.0.  Instructions and Environmental Conditions    
 
Handling of these products under power presents the risk of electric shock. 
The Products are to be used in dry locations only. 
The Products are not to be used where exposed to weather. 
 
2.1.  Installation 
 
These 3-Way CFL Products are designated for installation in 3-Way sockets only, as 
direct replacements to the Incandescent Bulbs. 
They are not for use with light dimmers. 
They are not for use in totally enclosed recessed fixtures. 
Whenever the Product is screwed into a typical ON-OFF Incandescent Fixture, it will 
generate a single Light Level, most typically the intermediate one. 
In a typical installation there is no need for the “harp” of the Table or Floor Lamp to be 
removed prior to installation. The Product will screw in like a regular Incandescent Bulb.