Capital Prospect Ltd MKA315 Manuale Utente
Skylink Remote Control
Model : MKA-315 PRELIMINARY COPY
1. INTRODUCTION
In this package, you will find a Skylink Remote transmitter with 3V lithium battery. The
Remote transmitter allows you to
operate the Skylink’s receiver.
There are four buttons on the transmitter MKA-315, each button can be programmed to
control Skylink receiver.
2. PROGRAM THE TRANSMITTER TO RECEIVER
In order for the remote control to communicate with the receiver, the transmitter must be
programmed to the receiver. Follow the brief instructions below to program transmitter to
the receiver you want to control.
Refer to the receiver user
’s instructions to set up the unit.
1. Press the Learn button on the receiver unit.
2. Once the learn button is pressed, the receiver LED will flash quickly. Release the
2. Once the learn button is pressed, the receiver LED will flash quickly. Release the
Learn button.
3. Press any one of the 4 buttons on the transmitter that you want to program to the
receiver
4. Once the transmitter is programmed, the receiver LED will flash slowly.
5. You may now operate the receiver with this new transmitter.
3. OPERATION
Press the button for 1 second and release, this will activate the “learned” Skylink
receiver(s).
4. BATTERY
The remote control operates on one 3-volt lithium battery that is installed at the factory.
Dispose of used battery properly according to the instructions.
5. WARRANTY
If, within one year from date of purchase, this product should become defective (except
battery), due to faulty workmanship or materials, it will be repaired or replaced, without
charge. Proof of purchase is required.
5. You may now operate the receiver with this new transmitter.
3. OPERATION
Press the button for 1 second and release, this will activate the “learned” Skylink
receiver(s).
4. BATTERY
The remote control operates on one 3-volt lithium battery that is installed at the factory.
Dispose of used battery properly according to the instructions.
5. WARRANTY
If, within one year from date of purchase, this product should become defective (except
battery), due to faulty workmanship or materials, it will be repaired or replaced, without
charge. Proof of purchase is required.
6. FCC statement
The device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the product.
compliance could void the user’s authority to operate the product.
7. IC
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and