Ansen Electronics Co R087GT Manuale Utente

 

Note: The effective operation range between the speaker and your Bluetooth device is 

approximately 10 meters (33 feet) line of sight maximum 

-  Slide the Power [ON/OFF] switch to “ON” to turn on the speaker 

-  The blue LED indicator which is located on the bottom left of the casing will flash   

-  Activate the Bluetooth function on your Bluetooth device 

- Select 

“

BT SPEAKER

” on your Bluetooth device for pairing 

-  When connected, the blue LED indicator stays steadily on 

-  Start music play on your Bluetooth device 

-  Adjust volume on your Bluetooth device or press the [+] or [-] button on the speaker 

- 

Press [Play/Pause] button on the speaker to play or pause music 

 

- 

Slide the Power [ON/OFF] switch to “OFF” when the speaker is not in use for power saving

 

 

-  Slide the Power [ON/OFF] switch to “ON” to turn on the speaker 

-  Connect your speaker with an external device through a 3.5mm cable (

not supplied

) 

-  Start music play on your device 

- 

Slide the Power [ON/OFF] switch to “OFF” when the speaker is not in use for power saving

 

 

-  Slide the Power [ON/OFF] switch to turn on the Speaker 

-  Press [LIGHT] button repeatedly to toggle between below modes 

1)  Continuous color changing mode 

2)  Fixed color mode:  

While it is in color changing mode, wait until your desired color appears and press [LIGHT] 

button to freeze the color 

3) Sound-to-Light mode:  

In fixed color mode, press [LIGHT] button once to switch to “Sound-to-light” mode and the 

top red light indicator 

will turn on. 

Start music play on your device, the color of the RGB LED light will change according to 

the beat of your music 

 

 

- If the sound volume is too low, the RGB LED light may not turn on and this is normal. 

Turn the volume up and the RGB LED will light up. 

 

- If the speaker is not playing any music or sound, the RGB LED will turn off 

4) Off mode