JSW Pacific Corporation UDS6 Manuale Utente
31
or to not have a bright LCD when sleeping. If Power Saving mode is on, motion detection events
will turn the LCD screen back on.
will turn the LCD screen back on.
1. From the SySteM SetuP screen, use VoL+
and VoL- to select poWeR SAvinG; press m. The
poWeR SAvinG screen displays.
2. Use Ch+ and Ch- to choose between 5 min, or 10 min; the third option is ALWAyS on,
which keeps the system from entering Power Saving mode. Press m to accept the setting
and return to the poWeR SAvinG screen.
multi Channel Idle Display
This screen lets you decide if the channels will display in quad mode or if they will cycle individually
in 5, 10, or 15 second intervals.
This screen lets you decide if the channels will display in quad mode or if they will cycle individually
in 5, 10, or 15 second intervals.
1. From the SySteM SetuP screen, use
VoL+ and VoL- to select muLti cHAnneL idLe
diSpLAy; press m. The muLti cHAnneL idLe diSpLAy screen displays.