Alvarion Technologies Ltd. BMAX-BA36 Manuale Utente
130
Operation
Chapter 4 - Operation and Administration
4.6.2.4.2
Run from Shadow
Select the Run from Shadow option to reset the NPU and run the Shadow version
after power up. To avoid unintentional actions you will be prompted to confirm the
request.
after power up. To avoid unintentional actions you will be prompted to confirm the
request.
4.6.2.4.3
Set as Main
When the NPU is running the Shadow version (after selecting Reset and Run from
Shadow), it will boot from the Main version after the next reset. Select the Set as
Main option if you want to swap versions so that the running version will become
the Main version and will be the version to be used after reset. To avoid
unintentional actions you will be prompted to confirm the request.
Shadow), it will boot from the Main version after the next reset. Select the Set as
Main option if you want to swap versions so that the running version will become
the Main version and will be the version to be used after reset. To avoid
unintentional actions you will be prompted to confirm the request.
4.6.2.5
Create Backup
The Create Backup option enables creating backup files of the Base Station
configuration. The backup file contains copies of all the applicable configuration
files and databases in the system.
configuration. The backup file contains copies of all the applicable configuration
files and databases in the system.
The following backup file types can be created:
Full: The entire Base Station configuration (excluding Passwords and basic IP
parameters of the MGMT and DATA ports - IP Address, Subnet Mask and
Default Gateway).
parameters of the MGMT and DATA ports - IP Address, Subnet Mask and
Default Gateway).
Profiles: All the profiles associated with services (Service Profiles, Forwarding
Rules, Priority Classifiers, QoS Profiles).
Rules, Priority Classifiers, QoS Profiles).
Profiles and Services: All the profiles and configurations associated with
service (General Service parameters, Subscribers, Services, Service Profiles,
Forwarding Rules, Priority Classifiers, QoS Profiles). This option is not
applicable for units operating in IP CS Switching Mode.
service (General Service parameters, Subscribers, Services, Service Profiles,
Forwarding Rules, Priority Classifiers, QoS Profiles). This option is not
applicable for units operating in IP CS Switching Mode.
Filtering: All the configurations of Filtering Rules, Interface Filtering and MAC
Address Deny List. This option is not applicable for units operating in IP CS
Switching Mode.
Address Deny List. This option is not applicable for units operating in IP CS
Switching Mode.
Traps: The configuration parameters for all traps.
BS License File: All license related information, including total, available and
used licenses, CPEs with allocated licenses (local or permanent), CPEs with
grace or temporary grace licenses and CPEs for which grace license expired.
used licenses, CPEs with allocated licenses (local or permanent), CPEs with
grace or temporary grace licenses and CPEs for which grace license expired.