Alvarion Technologies Ltd. BMAX-BA36 Manuale Utente
AU Menu
BreezeMAX Modular Base Station System Manual
155
and the Action to be taken with this file. Not applicable for any AU whose
Configured SW File Name is other than None (see
Configured SW File Name is other than None (see
)
The Default SW File (Standard) option not applicable for units operating in IP CS
Switching Mode.
Switching Mode.
The Default SW File (Standard) parameters are:
4.9.3.2.1
Name
The Name of the SW File to be used for upgrading an AU using Standard
Operation Mode after installation as well as after each reset. Should be one of the
AU SW Files currently stored in the NPU, or None (null).
Operation Mode after installation as well as after each reset. Should be one of the
AU SW Files currently stored in the NPU, or None (null).
4.9.3.2.2
Action
The operation to be performed with the Default SW File (Standard) when an AU
using Standard Operation Mode is installed, as well as after each reset: None (do
not load), Load (load to Shadow), Run from Shadow or Set as Main. Refer to
using Standard Operation Mode is installed, as well as after each reset: None (do
not load), Load (load to Shadow), Run from Shadow or Set as Main. Refer to
for more details on these Actions.
4.9.3.3
Default SW File (Advanced Si)
Select this option to define the Name of the SW File to be used for upgrading an
AU using Advanced Si Operation Mode after installation as well as after each
reset, and the Action to be taken with this file. Not applicable for any AU whose
Configured SW File Name is other than None (see
AU using Advanced Si Operation Mode after installation as well as after each
reset, and the Action to be taken with this file. Not applicable for any AU whose
Configured SW File Name is other than None (see
) The
Default SW File (Advanced Si) parameters are:
4.9.3.3.1
Name
The Name of the SW File to be used for upgrading an AU using Advanced Si
Operation Mode after installation as well as after each reset. Should be one of the
AU SW Files currently stored in the NPU, or None (null).
Operation Mode after installation as well as after each reset. Should be one of the
AU SW Files currently stored in the NPU, or None (null).
4.9.3.3.2
Action
The operation to be performed with the Default SW File (Advanced Si) when an AU
using Advanced Si Operation Mode is installed, as well as after each reset: None
(do not load), Load (load to Shadow), Run from Shadow or Set as Main. Refer to
using Advanced Si Operation Mode is installed, as well as after each reset: None
(do not load), Load (load to Shadow), Run from Shadow or Set as Main. Refer to
for more details on these Actions.
4.9.3.4
Delete a File
Select this option and enter the name of an existing AU SW file to delete it from
the NPU's memory.
the NPU's memory.
4.9.3.5
Clear All Configured AU SW Files
Select this option to clear (delete) the AU Configured SW File in all AUs.