Alvarion Technologies Ltd. BMAX-BA36 Manuale Utente
SU Menu
BreezeMAX Modular Base Station System Manual
187
2 - 3.5 MHz
3 - 5 MHz
4 - 7 MHz
5 - 10 MHz
A trial to configure a bandwidth that is not supported by the SU will be rejected.
4.10.7.3.3.2 Uplink (Tx) Frequency (MHz)
The Uplink (Tx) Frequency is the frequency used in the uplink (from SU to AU). A
change in the Uplink Frequency parameter will take effect only after resetting the
SU.
change in the Uplink Frequency parameter will take effect only after resetting the
SU.
The available values depend on the HW of the SU and the configured Bandwidth
for Standard operation mode.
for Standard operation mode.
4.10.7.3.4
Multirate and ATPC Parameters
The Multirate and ATPC mechanism are controlled by the AU (except to the option
to temporarily control them locally at the SU for testing purposes). The Show
Multirate and ATPC Status and Parameters option enables viewing the current
status of the applicable parameters. The Set Rates option can be used to set
uplink and downlink rates per SU only when Multirate is disabled.
to temporarily control them locally at the SU for testing purposes). The Show
Multirate and ATPC Status and Parameters option enables viewing the current
status of the applicable parameters. The Set Rates option can be used to set
uplink and downlink rates per SU only when Multirate is disabled.
4.10.7.3.4.1 Show
The Show option enables viewing the current status of the following parameters:
Uplink RSSI (dBm)
Uplink SNR (dB)
Uplink Current Rate
Downlink RSSI (dBm)
Downlink SNR (dB)
Downlink Current Rate
ATPC Support
Tx Power (dBm)