Alvarion Technologies Ltd. BMAX-BA36 Manuale Utente
32
Installation
Chapter 2 - Installation Guidelines
2.1
Installing the AU-ODU
The following sections describe how to install the AU-ODU, including pole
mounting the ODU and connecting the cables.
mounting the ODU and connecting the cables.
For more detailed instructions, refer to the BreezeMAX TDD Base Station
Installation & Maintenance Manual.
Installation & Maintenance Manual.
2.1.1
AU-ODU Installation Requirements
2.1.1.1
AU-ODU Packing List
AU-ODU
Pole mounting kit
2.1.1.2
Additional Installation Requirements
The following items are also required to install the AU-ODU:
IF cable with two TNC connectors* (see
Section 2.1.3
for details on IF cable
types and length).
Antenna* and RF cable* for connecting the antenna to the AU-ODU.
Grounding cable with an appropriate termination.
Installation tools and materials, including appropriate means (e.g. a 1" to 4"
pole) for installing the AU-ODU and antenna.
pole) for installing the AU-ODU and antenna.
An “H” kit for installation of up to 4 ODUs and 4 antennas that serve a single
sector is optionally available*.
sector is optionally available*.
NOTE
In sectors with diversity (either second or fourth order diversity), new 2.x GHz AU-ODUs with HC08
revision 137 (HW ready for 10 MHz bandwidth), cannot be connected to the same AU-IDU together
with older AU-ODUs with HC08 version 134. All AU-ODUs connected to the same AU-IDU must use
the same HC08 version.
revision 137 (HW ready for 10 MHz bandwidth), cannot be connected to the same AU-IDU together
with older AU-ODUs with HC08 version 134. All AU-ODUs connected to the same AU-IDU must use
the same HC08 version.
NOTE
Items marked with an asterisk (*) are available from Alvarion.