Alvarion Technologies Ltd. BMAX-BA36 Manuale Utente

40

Installation

Chapter 2 - Installation Guidelines

2.2

Installing the Base Station Equipment

2.2.1

BST Installation Requirements

„

Base Station Chassis:

‘

BMAX-BST-SH Base Station Chassis

‘

BMAX-BST-AVU Air Ventilation Unit (installed)

‘

Cables Tray kit

„

BMAX-BST-PIU (1 or 2 per chassis) Power Interface Unit(s), or 
BMAX-4M-BST-PIU (1 or 2 per chassis) High-Power Interface Unit(s). A 
suitable DC power cable is supplied with each PIU.

„

BMAX-BST-PSU (up to 4 per chassis) Power Supply Unit(s)

„

BMAX-BST-TDD-NPU Network Processing Unit and Monitor cable

„

BMAX-BST-AU-IDU-4CH (up to 6 per chassis) Access Unit Indoor Unit(s)

The following items are also required to install the BST:

„

Ethernet cable (straight) for connecting the NPU to a Hub/Switch. 

„

A grounding cable with appropriate terminations for connecting the chassis to 
the rack or another ground (earth) connection.

„

For installation in a 21" ETSI rack: Two 21" ETSI rack adapters

„

A portable PC for configuring parameters using the Monitor cable (supplied 
with the NPU)

The maximum length of the Ethernet cable is 100m when operating at 100 Mbps and 70m when 
operating at 1 Gbps.