Gemtek Technology Co. Ltd. R950829G Manuale Utente
User’s Guide
Version 1.0
If no OID is specified all SNMP request to the controller will be redirected to a
specific host.
specific host.
SNMP Trap Table:
You can configure your SNMP agent to send SNMP Traps (and/or inform notifications) under the
defined host (SNMP manager) and community name (optional).
defined host (SNMP manager) and community name (optional).
Figure 192 – SNMP Trap Table
Type – select trap message type [v1/v2/inform].
Host – enter SNMP manager IP address [dots and digits].
Community Name – specify the community name at a SNMP trap message. This community will be
used in trap messages to authenticate the SNMP manager. If not defined, the default trap community
name will be used (specified in the SNMP table) [1-32 all ASCII printable characters, no spaces].
used in trap messages to authenticate the SNMP manager. If not defined, the default trap community
name will be used (specified in the SNMP table) [1-32 all ASCII printable characters, no spaces].
Port – enter the port number the trap messages should be send through [number].
System | Access | Web Auth
Web auth controls all the built-in AAA web authentication method.
Figure 193 – Web Authentication methods
IP: IP authentication method. it means every client who has an IP address can be authenticated.
Before client authentication, its first web access of client will be redirected to a confirm/login page,
Need not any username or password, user just press confirm or OK button then client will be
automatically authenticated and client‘s MAC address will be act as the username of login session.
Need not any username or password, user just press confirm or OK button then client will be
automatically authenticated and client‘s MAC address will be act as the username of login session.
Pre-paid: If Pre-paid authentication was disabled, BW1330 would not use pre-paid database to
authenticate clients.
e-billing: If e-billing authentication was disabled, BW1330 would not use E-Billing built-in database to
authenticate clients.
RADIUS: BW1330 would use extern RADIUS server to do authenticate client if RADIUS
authentication setting was enabled.
POP3: By using pop3 mail address for user authentication.
BW1330 executes the web authentication with the below web authentication method order: IP auth,
Pre-paid auth, e-billing Auth and RADIUS auth. If one auth method failed (including setting of the
auth method is disabled), try next.
Pre-paid auth, e-billing Auth and RADIUS auth. If one auth method failed (including setting of the
auth method is disabled), try next.
BROWAN Page
109