Firstech Inc. J447R Manuale Utente

© 2001 Firstech, Inc.  Page 6  

  Activate Valet/Programming mode by manually turning the ignition on and 

off five times (between Acc and On) with car key within a 10 second period.

 

The 

parking light will flash once with successful completion of this step.  

 

  

Within a 10 second period after cycling the ignition for the 5

th

 time, press 

button I.  The car parking lights will flash once to confirm that the transmitter has 

been programmed. Continue program the additional remotes.  The parking lights 

will flash two times when the programming mode is expired.  

You can arm or disarm alarm mode by pressing Button I for a ½ second.  

Press Buttons (I+II) for a ½ second to make your car siren mute when arming or 

disarming your vehicle. Keep in mind that your car siren will still activate for all 

other modes (i.e. panic, alarm, shock sensor) regardless of whether or not your car 

siren is in mute mode.  The car siren will be mute only when arming or disarming 

your vehicle.  
 

In alarm mode, the starter kill function (this maybe an optional feature provided 

by your installer) is activated. This feature disengages the starter mechanism on 

your car that prevents you from starting your car even with a manual key when 

your vehicle’s alarm mode is activated.  

 

Note: If you lose your remote after you have armed the vehicle, use your key to 

open the vehicle. The siren will go off.  Turn on and off ignition 5 times with your 

key to shut off the siren and turn the system into valet mode.  Cancel the valet 

mode with remote later.  See Valet mode. 
 

Note: (Siren duration is 30 to 60 sec depending on the options set at the time of initial 

installation.)