Autostart AS6601 Manuale Utente

P. 14 User 

Guide 

Ignition Re-lock 

On remote starters of this series, when ignition-controlled door locks are enabled and the ignition 

key is in the 

 position, should any door be unlocked and opened, all doors will be 

relocked the next time the brake pedal is pressed. 

Secure Lock 

Before it can remote-start your vehicle, the remote starter must first disarm the factory security 

system. The secure lock feature may be required on certain vehicle models with factory security 

systems that automatically unlock the doors when the security system is disarmed. To keep your 

vehicle protected when the factory security system is disarmed for a remote start, secure lock will 

relock your doors as soon as the vehicle has started. Once the engine run cycle ends, secure lock 

will rearm your factory security system. 

Remote Trunk Release 

If your system was installed with the Remote Trunk Release option, you can open your trunk by 
pressing the   button for 3 seconds on the remote transmitter or by pressing the     button twice 
within 3 seconds. 

The Starter Kill and Anti-grind Feature 

With this added security feature, the system will prevent your vehicle from starting with the ignition 

key when the starter kill is armed. If your remote starter was installed with the starter kill option, 

one will not be able to start your vehicle with the key unless the system has been unlocked and 

disarmed first, or put into Valet Mode. 

Note: If the starter kill is installed, your vehicle will benefit from a protection against starter 
motor damage that could occur after remote-starting the engine should the user, by force of 
habit, turn the ignition key to the 

 position. 

Safe Start Mode 

If this feature is enabled, the user must press the   button 2 times within 3 seconds to remote-
start the vehicle. This will eliminate accidental remote starts, e.g. when children are playing with the 
transmitter. 
If Swap Start Mode is selected, to remote-start your vehicle, press the 

  button  and  then  the       

button. The 

 output can be activated by pressing the   button. 

 
How to access Safe Start Mode 

Start on Safe 

Start Mode 

x 2 

+   

Melody 

Press 

twice within 3 

seconds. Press for 1 sec-
melody-then press 1 sec.  

Stop on Safe 

Start Mode 

 

None Melody 

 

Installer-programmable Valet Modes 

Valet Mode Using the Valet Switch (

if installed

) 

When your vehicle is in Valet Mode, the remote starter functions are disabled. If the vehicle needs 

to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being remote-

started accidentally. 

1. Turn the ignition key to the 

 position. 

2. Within 3 sec., press the valet button.