Novatel Wireless NRM-EG301 Manuale Utente

Pagina di 2
 
 
 
2.  Attach Appropriate Antenna  
 
In North America, you will use the short PCS antenna. In Europe, use 
the longer GSM/DCS antenna. 
 
3.  Attach the Expedite G301 to the Interface Board 
 
4. Check 
Jumper 
Settings 
 
Jumpers should be installed only on the following locations: 
JP5, JP8, J15, and JP2 (see Figure 2 below) 
 
Figure 2 
 
RTS
CTS
DTM
DFM
DTR
DSR
JP5
J15
JP8
JP2
SIM
CARD
J106
OEM
TRIBAND
MODEM
 
5. 
Connect Communications Cable 
 
A straight serial cable should be connected to J106 PRIMARY.  Do not 
use a null cable.  Connect the cable to COM 1(or 2) on your PC. 
 
6. Insert 
Power 
Supply 
 
Power Supply is 5V rated at 2.0 Amps. Connect to J3. 
 
7.  Check Installation with Terminal Application 
 
Using a Terminal application such as HyperTerminal, create a session 
on the designated communications port COM 1(or 2) with the following 
settings:  
• 
Max. speed = 115,200  
• 
Data bit = 8 
• 
Parity = N  
• 
Stop bit = 1 
 
From the terminal window, the modem should respond to ‘AT’ with 
OK.  Additional AT Commands are available in the Novatel Wireless 
Technologies document entitled GPRS Technical Manual. 
 
8. 
Install the Modem Manager Software 
 
Insert the Expedite G301 CD into your computer. If the installation 
program does not launch automatically, open the CD in My Computer 
and select Autorun.exe from the ‘Modem Manager CD Image’ folder 
 
Select the operating system you will use. 
 
Select Software and follow the steps to install the software. 
 
The Installation Complete window  will appear. Ignore the PC Card 
insertion instructions and click Finish
 
 
 
9.  Install the Modem Driver 
 
From the Windows Control Panel, select Phone and Modem Options
 
Select the Modems tab and click Add
 
Select Do not detect my modem; I will select it from a list
 
Click Have Disk
 
Click Browse to look for the modem file named NwtGprs.INF. The file 
is located on the CD in the  ‘Drivers\ Expedite’ folder under the 
appropriate operating system. Click the file to select it. Click OK
 
Choose Novatel Wireless Serial GPRS Modem and click Next
 
Select the appropriate port number COM 1(or 2) and click Next
 
Click Finish to complete the installation of the modem driver. 
 
Reboot your computer. 
 
10. Configure your 
Modem 
 
 
Launch Modem Manager application by Selecting Start ->  
Programs -> Novatel Wireless -> GPRS Modem Manager. 
 
To connect to the Internet you will need to set up a connection as 
specified by the service provider.  Select Connection Manager from 
the Tools menu.  Add a new connection, give it the name of your 
choice, and enter the required information.  The service provider 
normally provides the APN with your SIM card. 
 
Once you have set up the connection profile, return to the Modem 
Manager
 main window and select Connect  to establish a network 
connection.  The Status window will indicate when the modem has 
successfully attached to the network and is ready to send and receive 
data. 
 
FCC Statement 
 
Changes or modifications not expressly approved Novatel Wireless Inc. could void the 
user’s authority to operate the equipment.