Cameo Communications Inc DSLR2001N Manuale Utente
Advanced
TRENDnet
DSLR-2001N
70
Response Interval, and Group Live Delay Time. If you are unsure
about them, leave the default values.
about them, leave the default values.
IGMP Snooping
With IGMP snooping, your Modem Router can make intelligent
multicast forwarding to connections that have group members
attached. As a result, IGMP snooping prevents or reduces traffic
on the interface that is not registered as a receiver of a
specific multicast group.
multicast forwarding to connections that have group members
attached. As a result, IGMP snooping prevents or reduces traffic
on the interface that is not registered as a receiver of a
specific multicast group.
Select IGMP Proxy Version. Enter values for IGMP Query Interval,
Robust Count, IGMP Last Member Query Interval, IGMP Robustness,
Query Response Interval, and Group Live Delay Time.
Robust Count, IGMP Last Member Query Interval, IGMP Robustness,
Query Response Interval, and Group Live Delay Time.
Check the boxes to enable IGMP for WLAN, LAN1, LAN2, LAN3, and
LAN4.
LAN4.
Click the Apply button to save your changes or click the Cancel
button to discard your changes.
button to discard your changes.
6.11 Dynamic DNS
Each time your Modem Router connects to the Internet, your ISP
assigns a different IP address to your device. In order to access
your device from the WAN side, you need to manually track the IP
that is currently used. The Dynamic DNS (DDNS) feature allows you
to register your device with a DNS server and use the same host
name to access your device.
assigns a different IP address to your device. In order to access
your device from the WAN side, you need to manually track the IP
that is currently used. The Dynamic DNS (DDNS) feature allows you
to register your device with a DNS server and use the same host
name to access your device.
To access the Dynamic DNS page, click ADVANCED > Dynamic DNS.
The table lists the current DDNS. To edit an entry, click the
corresponding
icon. To delete an entry, click the corresponding
icon.
To add DDNS, click the Add button.
Connection Name — Select a connection from the drop-down list.