HTC Corporation 2PYV300 Manuale Utente
- 4 -
133872666.1
direct sunlight or strong ultraviolet light for extended periods of time. The headset contains
lenses which may focus and intensify bright light sources, causing damage to the hardware.
lenses which may focus and intensify bright light sources, causing damage to the hardware.
General Precautions
Do not connect with incompatible peripherals.
Do not attempt to disassemble this product.
Use only qualified personnel to service or repair this product.
Always treat the product with care and keep it in a clean and dust-free place.
Do not expose the product to open flames or lit smoking products.
Do not drop, throw or try to bend the product.
Do not use harsh chemicals, cleaning solvents, liquid cleansers or aerosols to clean the
product.
Do not paint the product.
Store the product at temperatures between 0°C to 40°C
Please check local regulations for proper disposal of electronic products.
Avoid hot areas. The product should be placed away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce heat.
Avoid using the product after a dramatic change in temperature. When you move the
product between environments with very different temperature and/or humidity ranges,
condensation may form on or within the product. To avoid damaging the product, allow
sufficient time for the moisture to evaporate before using the product. NOTICE: When
taking the product from low-temperature conditions into a warmer environment or from
high-temperature conditions into a cooler environment, allow the product to acclimate to
room temperature before turning on power.
condensation may form on or within the product. To avoid damaging the product, allow
sufficient time for the moisture to evaporate before using the product. NOTICE: When
taking the product from low-temperature conditions into a warmer environment or from
high-temperature conditions into a cooler environment, allow the product to acclimate to
room temperature before turning on power.
Damage Requiring Service
Contact an authorized service technician or provider under the following conditions:
The product has been damaged by exposure to liquid, dropped, subject to impact or
damaged.
There are noticeable signs of overheating.
The product does not operate normally when you follow the operating instructions.