HBC-radiomatic GmbH TF011 Manuale Utente
TF0110__ integration manual
HBC
Author: Florian Abelein
Date: 08.06.2018
Seite 3 von 4
Revision: 0
3
Authorization requirements
The integrator of a certified module is responsible for ensuring that the end product consisting of host and
module(s) installed continues to be compliant with all the intentional radiator requirements applicable to the
module(s) and the host. When additional application filing for RF exposure compliance demonstration is not
required, the host manufacturer may do evaluation without any filing if compliance with transmitter output power,
out-of-band, restricted band, and spurious emission requirements as specified in 47 CFR Part 15 subpart C and
appropriate ISED Radio Standards Specifications (RSS) is confirmed for the end product.
The host manufacturer is also responsible for ensuring that the host continues to be compliant with the 47 CFR
Part 15 subpart B unintentional radiator requirements after the module is installed and operational. Therefore, the
procedure for equipment authorization of unintentional radiators as stated in §15.101 applies to the end product,
too.
module(s) installed continues to be compliant with all the intentional radiator requirements applicable to the
module(s) and the host. When additional application filing for RF exposure compliance demonstration is not
required, the host manufacturer may do evaluation without any filing if compliance with transmitter output power,
out-of-band, restricted band, and spurious emission requirements as specified in 47 CFR Part 15 subpart C and
appropriate ISED Radio Standards Specifications (RSS) is confirmed for the end product.
The host manufacturer is also responsible for ensuring that the host continues to be compliant with the 47 CFR
Part 15 subpart B unintentional radiator requirements after the module is installed and operational. Therefore, the
procedure for equipment authorization of unintentional radiators as stated in §15.101 applies to the end product,
too.
4
Labeling requirements for the host
At the HBC-transmitter into which the TF011010 module is installed the label has to be added with the following
content:
content:
Contains FCC ID: NO9TF011
Contains IC: 2977A-TF011
5
RF exposure statement (mobile and fixed devices)
This device complies with the RF exposure requirements for mobile and fixed devices. However, the device shall
be used in such a manner that the potential for human contact during normal operation is minimized.
be used in such a manner that the potential for human contact during normal operation is minimized.
6
RF exposure statement (portable devices)
This device complies with the RF exposure SAR test exclusion requirements for portable devices, if a minimum
separation distance (1 mm ) is kept. However, the device shall be used in such a manner that the potential for
human contact during normal operation is minimized.
separation distance (1 mm ) is kept. However, the device shall be used in such a manner that the potential for
human contact during normal operation is minimized.
7
Instruction manual requirements
The following content has to be added in the instruction manual of the HBC-transmitter which contains the
TF011010 module:
TF011010 module:
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
”
Modification of equipment
The instruction manual of the host shall include the following statement:
Changes or modifications made to this equipment not expressly approved by the party responsible for
compliance may void the FCC authorization to operate this equipment.
Information to the user
(The instruction manual of the host shall include the following statement)