Youngshin Electronics Co. LTD. J2000R Manuale Utente
Page 4 of 8
- 4 -
4. Start Function
Press Button II for 2 Seconds to start the engine. The engine will start and give you a
confirmation on the Remote-pager. The engine will run 15 minutes (25 min for diesel) or
25 minutes (40 min for diesel) . If the engine has a problem starting the system will retry
2 more times. If the engine dose not start after the 3
Press Button II for 2 Seconds to start the engine. The engine will start and give you a
confirmation on the Remote-pager. The engine will run 15 minutes (25 min for diesel) or
25 minutes (40 min for diesel) . If the engine has a problem starting the system will retry
2 more times. If the engine dose not start after the 3
rd
attempt, please call you
Authorized Dealer.
Note: Runtime, please consult you Authorized Dealer.
5. Safety Shut Down
System has several Shut Down inputs. That will shut down the engine or prevent from
remote starting.
System has several Shut Down inputs. That will shut down the engine or prevent from
remote starting.
•
the Hood is opened,
•
the Brake is pressed,
•
the Valet is entered, or
•
the Valet switch is turned on.
6. VPS(Vehicle Paging System)
VPS is turned on upon arming. If the VPS sensor is triggered by an impact such as
knocking on the VPS module, the transmitter will be paged.
VPS is turned on upon arming. If the VPS sensor is triggered by an impact such as
knocking on the VPS module, the transmitter will be paged.
7. Aux 1 & Aux 2
The system has Aux 1 & Aux 2 output to be utilized with optional features. (Consult your
Authorized Dealer)
The system has Aux 1 & Aux 2 output to be utilized with optional features. (Consult your
Authorized Dealer)
8. Valet Mode and Valet Switch
To enter Valet mode, press Buttons I & III simultaneously for ½ Second or insert the key
into the ignition and tuned the ignition on and off five times within 10 seconds. In Valet
mode, the system will only activate Locks, Trunk, and the Auxiliary only. To exit Valet
Mode press Button I & III simultaneously for ½ Second.
To enter Valet mode, press Buttons I & III simultaneously for ½ Second or insert the key
into the ignition and tuned the ignition on and off five times within 10 seconds. In Valet
mode, the system will only activate Locks, Trunk, and the Auxiliary only. To exit Valet
Mode press Button I & III simultaneously for ½ Second.
9. Shock Sensor
Dual Stage Shock Sensor will activate 30 Sec. after the system is Armed (Locked).
When 1
Dual Stage Shock Sensor will activate 30 Sec. after the system is Armed (Locked).
When 1
st
stage is triggered the siren will chirp 4 times and Remote-pager will receive a
notification of the violation.(Vibration Icon will appear) When 2
nd
stage is triggered the
siren will activate and Remote-pager will receive a notification of the violation.(Hammer
will appear)
will appear)
10. Timer Mode
To enter the Timer Mode press Buttons II & IV simultaneously for ½ Second. The
system will start every 1.5 Hrs. till Timer Mode is deactivated and automatically canceled
if the vehicle is started with the Key or Remotely. To Exit Timer Mode press Button II &
IV simultaneously for ½ Second again.
To enter the Timer Mode press Buttons II & IV simultaneously for ½ Second. The
system will start every 1.5 Hrs. till Timer Mode is deactivated and automatically canceled
if the vehicle is started with the Key or Remotely. To Exit Timer Mode press Button II &
IV simultaneously for ½ Second again.
11. 2
nd
Car Mode
System is able to operate 2
nd
vehicle. Press Buttons III & IV simultaneously for ½
Second. Feature may be different for 2
nd
vehicle regards to options. To Exit 2
nd
Car
press Button III & IV simultaneously again. (Consult your Authorized Dealer)