UTStarcom Korea Technologies Ltd. CDM7025 Manuale Utente

Pull down the release latch, lift up the battery cover. 

Remove the battery from the handset.

Plug the AC Charger into a standard outlet.

Plug the other end of the AC Charger into the bottom of your
phone.  The battery must be installed onto the phone.

If the battery is not correctly placed in the compartment,the
handset will not turn on and/or the battery may detach during use.

Note

• When you charge the battery with the phone power off, you 

will see a charging status screen. You cannot operate the phone

until it is powered on.

• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset powered 

off.

• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace 

the battery.

Hot Key