Recsol I&C Co. Ltd. RECSPEED-8000E Manuale Utente
RECSOL I&C ADSL MODEM RECSPEED-8000E User’s manual
17
5.4.2 Main Menu – ATM Interface – Create ATM PVC
This menu is used to set the ATM PVC. Up to four ATM PVCs can be set. One ATM PVC
operates as one bridge port. At this time, such parameters as the port number of the
corresponding PVC, VPI/VCI value and PCR value must be specified.
operates as one bridge port. At this time, such parameters as the port number of the
corresponding PVC, VPI/VCI value and PCR value must be specified.
Values available for these parameters: 2 – 5 for port number, 0 – 255 for VPI value, 0 – 65535 for
VCI value, and 0 – 1000 for PCR value.
VCI value, and 0 – 1000 for PCR value.
However, if the VPI value is set as 0, the VCI value is 32-65535. This is because VPI of 0/0- 0/31
and VCI values are defined in advance by the related standards for the special use.
In addition, the PCR value should not exceed 1000 by summing up the PCR values that are set in
up to four set ATM VCCs. For example, if the PCR values of port number 2, 3, and 4 are 200,
300, and 300 respectively, the PCR value of port number 5 available for the ATM VCC setup
should not exceed 200.
and VCI values are defined in advance by the related standards for the special use.
In addition, the PCR value should not exceed 1000 by summing up the PCR values that are set in
up to four set ATM VCCs. For example, if the PCR values of port number 2, 3, and 4 are 200,
300, and 300 respectively, the PCR value of port number 5 available for the ATM VCC setup
should not exceed 200.
The following screen is displayed.
RECSPEED-8000E - Main Menu – ATM Interface – Create ATM PVC
Input Port No (2 – 5) : 3
Input VPI Value (0 – 255) : 0
Input VCI Value (0 – 65535) : 32
Input PCR (0 – 1000 Kbps) : 640
Input VPI Value (0 – 255) : 0
Input VCI Value (0 – 65535) : 32
Input PCR (0 – 1000 Kbps) : 640
Recording Changes. This may take a while … Done
After setting the ATM VCC as shown above, verify the setup status by using the “Show
connection” menu, and the setup result is displayed.
connection” menu, and the setup result is displayed.
5.4.3 Main Menu – ATM Interface – Delete ATM PVC
This menu option is used to delete ATM PVCs. You must specify the number of port associated
with ATM PVC to be deleted.
If you do not know the port number to be deleted, first display the current PVC setup status and
then, enter the port number.
with ATM PVC to be deleted.
If you do not know the port number to be deleted, first display the current PVC setup status and
then, enter the port number.
The port number ranges from 2 to 5.
The following example shows that the ATM VCC assigned for port number 2 is deleted.
RECSPEED-8000E - Main Menu – ATM Interface – Delete ATM PVC
Input Port No (2 – 5) : 2
Recording Changes. This may take a while … Done
After deleting the ATM VCC already set as shown above, verify the deleting status by using the
“Show connection” menu.
“Show connection” menu.