Monitor Audio MA191820 Manuale Utente

1.  Standby.  Either puts the S200 into standby or wakes it 

from standby.  When woken from standby it will start in the 
previously selected input.  When held down, the S200 enters 
Ready Mode.

2.  Informative LED.    Will  illuminate  different  collours  and 

flash in varius sequences to identify the current state of the 
S200 (refer to page 17 for the key and explanations behind 
each of these).

1

7

3

4

5

6

8

9

10

7.  Wi-Fi Sharing/ Factory Reset button.  This button also 

serves  two  purposes:    A  short  press  is  required  when 
connecting the S300 to a wireless network. Press and hold 
for 12 seconds to perform a factory reset.  

8.  Mains power input.  Connect the supplied mains lead here.
9.  Auxiliary input.  This is used to connect an additional  

device via a 3.5mm stereo jack lead (not supplied).

10.  USB input.  Connect an iPod, iPhone, iPad via the Apple USB 

cable (not supplied) for music playback of devices that are 
not AirPlay enabled. Also used for connecting the S300 to a 
wireless network.  Refer page 6.  Devices can also be charged 
via the USB, but the S300 needs to be out of standby mode.

11.  Baffle.  ????

3.  Volume up.  Increases the volume level of playback.
4.  Volume up.  Increases the volume level of playback.
5.  Airplay.  Switches between Airplay and Airplay Direct modes.
6.  Input toggle.  Scrolls through the available inputs in the 

order of AirPlay > USB > Aux.

The S200

11

2