KP Electronic Systems Ltd KPMTWEN1HL Manuale Utente
Installation manual
The MTWE is designed for inside / outside installations for all non pit applications.
MTWE is a long range radio Meter Transmission Unit (MTU). The MTU interrogates the
encoder register at a preprogrammed interval to obtain the most recent read, and
transmits the data to the base station receiver. Single- port and dual-port encoder type
MTUs are available.
Required tools and materials
•
Wire stripping tool.
•
Screwdriver – small standard head for terminal connections.
•
Power drill and bit (¼”).
•
1¼ “sheet metal / wood screws.
•
FTU101
•
FTU100WMP
Wall mount – Installation Process
•
Place the mounting bracket on intended installation location.
•
Mark the location to pre drill the holes.
•
Remove the bracket from the wall and use a ¼” drill bit to pre drills the holes.
•
Place the bracket on the wall and align it with the holes.
•
Mount the bracket to the wall using two 1¼” screws.
Figure -Error! No text of specified style in document.1: Wall Mount Installation Process