Askey Computer Corp RTW020 Manuale Utente
Access Point Configuration
4-3
When the connection has successfully been established, you get a message in the right
bottom corner indicating “All values retrieved”. If the message “Not all values retrieved”
appears, you need to repeat the above procedure (Figure 4-1).
bottom corner indicating “All values retrieved”. If the message “Not all values retrieved”
appears, you need to repeat the above procedure (Figure 4-1).
As soon as the connection has been established, you are now able to start viewing or
setting the Access Point parameters. Under the “Setup” menu, there are three options
available (Figure 4-4):
setting the Access Point parameters. Under the “Setup” menu, there are three options
available (Figure 4-4):
• Bridge
• Wireless LAN
• Enable SNMP Traps
Figure 4-4. SNMP Bridge menu and submenus
Under the “Bridge” option, there are two submenus: “IP Configuration” and “Operational
Mode”. The “Ethernet Address”, “IP Configuration” and “IP Mask” can either be viewed
or changed through the “IP Configuration” (Figure 4-5). If changes are made, you need
to “Download Changes” under the “File” menu in order to save them.
Mode”. The “Ethernet Address”, “IP Configuration” and “IP Mask” can either be viewed
or changed through the “IP Configuration” (Figure 4-5). If changes are made, you need
to “Download Changes” under the “File” menu in order to save them.