Askey Computer Corp WLL3041 Manuale Utente
54Mbps 802.11g Wireless LAN Card
44
Appendix C Setting Up TCP/IP
This section contains instructions for configuring the TCP/IP protocol of the Wireless LAN Card. The IP address policy depends on your wireless
network. You should configure your TCP/IP protocol as instructed by your network administrator.
network. You should configure your TCP/IP protocol as instructed by your network administrator.
For Windows 98/ME
1. Double-click
the
Network icon on the Control Panel.
2. Click
the
Configuration tab of the Network dialog box.
3. In
the network components list, select the TCP/IP protocol of your Wireless LAN Card, e.g., TCP/IP ->Broadcom 802.11g Network Adapter
and then click Properties.
4. On
the
IP Address tab, choose one of the methods as required:
Option
A: Click Specify an IP address.
In the IP Address box, enter a valid four-component IP address, either a public or private one as required.
In the Subnet Mask box, enter a valid four-component IP address.
Then select the Gateway tab and enter your gateway information.
Option
B: Select Obtain an IP address automatically.