SHENZHEN FENDA TECHNOLOGY CO. LTD. UB450 Manuale Utente

DISTRIBUTOR’S COPY

WARRANTY REGISTRATION CERTIFICATE

****************************************************

Mr./Mrs/Ms First Name:

Last Name:

Address：
Contact No.:

Product Name:

Model No.:

Serial No.:

Date Purchased:

Invoice No.:

Retail Outlet Where Purchased:

(Please print the name & address)

Power On: Long press “MFB” for 2 seconds until the
blue indicator light flashes.
Power off: With the headset on, long press “MFB”
for 3 seconds, the red indicator light flashes
2 seconds and goes off.
Answering a call: Press the answer key on your phone
or short press “MFB” on your headset.
Ending a call: Press the end key on your phone or
short press “MFB” on your headset.
Rejecting a call: Press the end key on your phone or
long press the “MFB” button for 2 seconds on your
headset.
Redialing the last called number: Double press the
“MFB” button when headset is in standby mode.
Play/Pause: When you are listening to the music from
the headset, you can short press “MFB” to play and
pause.
Previous/Nect Track: Previous Track when press the
“+” 2 seconds. Next Track when press the“-”
2 seconds.
Volume control: Volume will be up when short press
“+” and will be down when short press “-”.
Microphone Mute: During a call, press “-” for
about 2 seconds it will mute, press “-” for about
2 seconds it will work again.

Function and Operation

Product Overview

Previous Track

Volume +

Indicator Light

MFB

Charging port

Mic

Next Track

Volume -

Right Channel

Left Channel

Pair to your Phone
•  Pair the headset for the first time, the distance
between the headset and your
phone would be better within 1 meter when pairing.
•  With the headset power off, hold and press “MFB” until
the headset is pairing status, red light and blue light
flash alternately.
•  Start mobile phone function.
•  Search device, Choose “UB450”.
•  Depending on your device you may be prompted to enter
a pairing code. If prompted enter “0000” as the code.
•  Repeat above-mentioned steps if the pairing was
unsuccessful.
•  The green light will flash if paired successfully.

Voice Prompt
When your UB450 isn’t rocking out, it can tell you
sorts of things it’s doing: Power on; Power off; Your
headset is enter pairing mode; Your headset is
connected; Battery low.

Voice dialing: On the status of standby, long press
“MFB” .
Low power alarm: When the headset is power on, if
the battery volatge is lower than 3.3V, there will be a
prompt and the red indicator light flashes every 20
seconds.
Charging status: Red indicator light remains solid when
charging, the blue indicator light remains solid when
completed.
Low power shutdown: When the headset is power on,
if the battery voltage is lower than 3.0V, the headset
will shutdown automatically.
Call switching: Call switching between mobile phone
and headset: during a call, long press “MFB”, the audio
will be switched from the headset to mobile
phone; Long press “MFB”, the audio will be switched
from mobile phone back to the headset.
Connect two mobile phones at the same time:
•  After paired the first mobile phone, please turn off the
function of the first mobile phone, then pair
to the second mobile phone.
•  Open the first mobile phone function,
manual connection the first mobile phone.
•  During a call, short press “MFB”, hang up the current
call, then answer the incoming call.
•  Double press “MFB” to answer another incoming
call while you are on one phone call, and switch
between the two incoming calls.
•  Short press “MFB” to cut off the incoming calls one
by one.

Important: Different mobile phone brands or menu funtions,
the operation will be different. Please read your phone’s
manual carefully.

OFF

NFC Function
The mobile phone only need to get close to the headset
NFC detecting area when the headset is on.

* MFB:Multi-Function Button

Handling of the Waste Electrical

Note: While two mobile phones are connecting one
headset, some functions of the
headset will be restricted.

The Waste Electical

This marking shown on the product or its literature

indicates that is should not be disposed with other

household wastes at the end of its working life.

To prevent possible harm to the environment or human

health from uncontrolled waste disposal, please separate

this from other types of wastes and recycle it responsibly

to promote the sustainable reuse of material resources.

Household user should contact either the retailer where

they purchased this product or their local government

office, for details of where and how they can take this

item for environmentally safe recyling.

Business users should contact their supplier and check

the terms and conditions of the purchase contract.This

products should not be mixed with other

commercial wastes for disposal.

NFC

Bluetooth

hotncold