Honeywell International Inc. 7400-352 Manuale Utente
56
•
•
•
•
•
•
,%
)
When seated in the HomeBase/IntelliBase/USB HomeBase, the Dolphin terminal
receives the power it needs to charge the battery and to run its internal circuitry.
receives the power it needs to charge the battery and to run its internal circuitry.
The Dolphin terminal can be stored indefinitely in the HomeBase/IntelliBase/USB
HomeBase without damage to the terminal or the HomeBase/IntelliBase/USB
HomeBase. Keep the HomeBase/IntelliBase/USB HomeBase plugged in so that
the Dolphin terminal battery pack stays fully charged.
HomeBase without damage to the terminal or the HomeBase/IntelliBase/USB
HomeBase. Keep the HomeBase/IntelliBase/USB HomeBase plugged in so that
the Dolphin terminal battery pack stays fully charged.
$)
)*
The HomeBase/IntelliBase/USB HomeBase supplies charging power to the
Dolphin terminal so that the terminal can monitor the charging of its battery pack.
This charging method protects the battery from being damaged by overcharging.
Therefore, the Dolphin terminal may be stored indefinitely in the HomeBase/
IntelliBase/USB HomeBase without damage to the terminal, the battery pack, or
the HomeBase/IntelliBase/USB HomeBase.
Dolphin terminal so that the terminal can monitor the charging of its battery pack.
This charging method protects the battery from being damaged by overcharging.
Therefore, the Dolphin terminal may be stored indefinitely in the HomeBase/
IntelliBase/USB HomeBase without damage to the terminal, the battery pack, or
the HomeBase/IntelliBase/USB HomeBase.
To charge a Dolphin terminal, follow these steps:
1. Insert a battery pack into the Dolphin terminal.
2. Place the terminal, imager/laser engine window up and the LCD visible, in the Terminal
Well of the HomeBase/IntelliBase/USB HomeBase.
3. Let it glide down into the well until it stops.
4. Once the Dolphin terminal is properly seated, the Dock LED on the
HomeBase/IntelliBase/USB HomeBase will be solid GREEN.
=$
)
For maximum battery life, Hand Held Products recommends that you deep-cycle
(service) the battery twice before initial use and then, once a month thereafter.
Since the Dolphin 7400 HomeBase/Intellibase/USB HomeBase
(service) the battery twice before initial use and then, once a month thereafter.
Since the Dolphin 7400 HomeBase/Intellibase/USB HomeBase
do not
have deep-
cycling capabilities, it is recommended that you use the Battery Conditioning
Utility software or Dolphin 7400 Quad Battery Charger. See the Battery
Management section in Chapter 3 for more information.
Utility software or Dolphin 7400 Quad Battery Charger. See the Battery
Management section in Chapter 3 for more information.
Baud Rate
Switch 1
Switch 2
Switch 3
Switch 4
OFF
ON
ON
N/A
ON
OFF
OFF
N/A
ON
OFF
ON
N/A
ON
ON
OFF
N/A
ON
ON
ON
N/A