Honeywell International Inc. 7400-476 Manuale Utente
2 - 9
Click OK to continue using DetectoidPC to set up communication settings.
On starting, DetectoidPC will check for the availability of COM ports, as well as IrDA/USB support. Once the terminal is detected,
the port status will change from “Idle” to “Listening” as shown in the screen shot above.
the port status will change from “Idle” to “Listening” as shown in the screen shot above.
DetectoidCE
After running DetectoidPC, start Detectoid CE on the Dolphin terminal selecting Start>HHP>DetectoidCE.
DetectoidCE will attempt to find the connection with the PC. If successful, the discovered settings will be saved. Touch OK and
the terminal is now configured for ActiveSync to start automatically when the terminal is connected via a powered serial cable or
docked in a powered IntelliBase. See chapter 12 for information if you prefer to manually start ActiveSync to establish
communications.
the terminal is now configured for ActiveSync to start automatically when the terminal is connected via a powered serial cable or
docked in a powered IntelliBase. See chapter 12 for information if you prefer to manually start ActiveSync to establish
communications.
If you want to go back and change the settings later, select Start>Settings>Control Panel>Communication Properties and
select the Launch tab.
select the Launch tab.
Once the communications parameters have been detected and configured, the status indicator will change to “Success”. Verify
that the ActiveSync settings are correct, then click save to transfer those settings to ActiveSync.
that the ActiveSync settings are correct, then click save to transfer those settings to ActiveSync.