Honeywell International Inc. 7400-476 Manuale Utente

When you cold-boot the Dolphin 7400/7450 RF terminal, the red LED comes on and the green LED blinks, and after 
approximately 3 seconds, the welcome screen shown below will appear.  

Tap the screen or press <Enter> and you will be prompted to calibrate the screen and set the time zone. Refer to the section on 
Calibrating the Screen, Setting the Time Zone

in Chapter 2 for additional information. After the wizard is finished, the Dolphin 

demos and Cisco® radio drivers self-install and the main menu for the HHP demos displays.

®

The following utilities are available for configuring the Cisco 802.11b radio:

Client Utility (ACU) - Configures the radio for use in a wireless network

Wireless Login Module (WLM) - Provides login interface to Radius server if using LEAP 

This document covers the basics of the Client Utility (ACU). For more detailed information on these and the other utilities, please 
refer to the document entitled “Using the Client Utilities for Windows CE” included on the Dolphin Documentation CD.