Honeywell International Inc. CS19A Manuale Utente

5 - 5

An intercharacter delay of up to 5000 milliseconds (in 5ms increments) may 
be placed between the transmission of each character of scanned data.  
Scan the Intercharacter Delay bar code below, then scan the number of 
5ms delays, and the Save bar code using the 

 inside 

the back cover of this manual.

To remove this delay, scan the Intercharacter Delay bar code, then set the 
number of delays to 0.  Scan the Save bar code using the 

 inside the back cover of this manual.

Note: Intercharacter delays are not supported in USB serial emulation.

An intercharacter delay of up to 5000 milliseconds (in 5ms increments)  

may be placed after the transmission of a particular character of scanned 
data.  Scan the Delay Length bar code below, then scan the number of 
5ms delays, and the Save bar code using the 

 inside 

the back cover of this manual. 

Next, scan the Character to Trigger Delay bar code, then the 2-digit hex 
value for the ASCII character that will trigger the delay 

To remove this delay, scan the Delay Length bar code, and set the number 

of delays to 0.  Scan the Save bar code using the 

 

inside the back cover of this manual.

1

2

3

4

5

Prefix

Scanned Data

Suffix

Preliminary Draft