Honeywell International Inc. CS19A Manuale Utente

7 - 3

<Default All Codabar Settings>

Start/Stop characters identify the leading and trailing ends of the bar code. 
You may either transmit, or not transmit Start/Stop characters.  

Default = Don’t Transmit.

Codabar check characters are created using different “modulos.”  You can 
program the scanner to read only Codabar bar codes with Modulo 16 check 
characters. 

 Default = No Check Character.

 indicates that the scanner reads and transmits bar 

code data with or without a check character.

When Check Character is set to Validate and Transmit, the scanner will 

only read Codabar bar codes printed with a check character, and will trans-
mit this character at the end of the scanned data.

Preliminary Draft