Honeywell International Inc. CS19A Manuale Utente

7 - 6

< Default All Code 39 Settings >

Start/Stop characters identify the leading and trailing ends of the bar code. 
You may either transmit, or not transmit Start/Stop characters.  

Default =  

Don’t Transmit.

 indicates that the scanner reads and transmits bar 

code data with or without a check character.

When Check Character is set to Validate, but Don’t Transmit, the unit 

only reads Code 39 bar codes printed with a check character, but will not 
transmit the check character with the scanned data.  

Preliminary Draft