Honeywell International Inc. CS19A Manuale Utente

7 - 12

< Default All NEC 2 of 5 Settings >

 indicates that the scanner reads and transmits bar code 

data with or without a check digit.

When Check Digit is set to Validate, but Don’t Transmit, the unit only 
reads NEC 2 of 5 bar codes printed with a check digit, but will not transmit 

the check digit with the scanned data.  

When Check Digit is set to Validate and Transmit, the scanner only reads 

NEC 2 of 5 bar codes printed with a check digit, and will transmit this digit 
at the end of the scanned data.  

Default = No Check Digit.

Preliminary Draft